Battery installed

- May 03, 2017 -

⒈ battery placed in the control box to be lightly to prevent smashing control box;

⒉ the connection between the battery must be bolted to the battery terminal and the use of copper gasket to enhance the conductivity;

⒊ output line connected to the battery in any case to prohibit short, to avoid damage to the battery;

⒋ the output line of the battery and the pole in the controller must be connected through the PVC threading tube;

⒌ after the completion of the above, check the controller side of the wiring to prevent short circuit. Normal shut the door after the control box.

Related Industry Knowledge

Related Products

  • Outdoor Beautiful Sunflower Lamp Solar Garden Light LED
  • 30W Wirless Control Intelligent Integrated Solar LED Street Light
  • 50W Outdoor Intelligent All in One Solar Street Light with Solar Panel and Battery
  • 40W New Design High Efficiency Intelligent Solar LED Street Lamp
  • Factory Directly Outdoor LED Solar Flood Lamp with IP65
  • 50W Outside Wireless Smart Intelligent Motion Sensor Integrated All in One LED Solar Street Light